CANM8-PARKTONE

Replacing an OE audio unit in some modern vehicles can lead to some nasty suprises - one of these is the loss of the OE audible parking tones.....

Advances in CAN Bus technology have enabled manufacturers to use the vehicle audio system for more than just entertainment. More and more vehicle types are now equipped with standard parking sensor systems that deliver obstacle proximity information to the audio unit using the vehicle CAN Bus. The audio unit presents this information using audible tones via the vehicle speakers.

The CANM8-PARKTONE interface reads proximity information direct from the vehicle CAN Bus and produces proximity tones via a tiny, hide-away Piezo sounder, as a substitute for the audible tones originally generated by the OE audio unit.

The PARKTONE interface is designed for the installation of replacement audio units that do not feature AV or navigation. The CANM8-NAVTONE interface detailed here, provides an all-round solution for AV / navigation installation.

The CANM8-PARKTONE is supplied with a universal wire-in harness. Alternative 'Plug & Play' harnesses are available seperately. The interface wiring is connected as below:

RED                                 12v+ Permanent Supply
BLACK                             0V (Ground)
WHITE                             CAN HI
BLUE                               CAN LO

PURPLE                          12v+ 'Ignition On' Output
YELLOW                          Sounder Control Output

The CANM8-PARKTONE Interface is compatible with the vehicles listed below. The interface automatically identifies the vehicle type via the CAN Bus, no installer programming is required.

• BMW : 1 Series (E87) - 3 Series (E90 / E91 / E92) - 5 Series (E60 / E61 / E63) ***
  
• Citroen : C4 - C8
• Land Rover : Freelander 2 ***
• Peugeot : 207 - 307 - 308  - 807
• Volvo : V70 - XC70 - XC90

There are no reviews for ‘CANM8-PARKTONE’