0845 226 6283

My Cart:

0 item(s) - £0.00
You have no items in your shopping cart.

0

CANM8 CANNECT START-STOP DISABLE

Quick Overview

CAN Bus 'Start/Stop Function' Disable Interface

Only 99993 left

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

The introduction of 'Economy Drive' systems into vehicles has meant that more and more vehicles now feature an engine 'Start Stop' system as standard. Although engineered to enhance fuel economy, where vehicles are required for a special operational role such as those used as Police vehicles, the Start - Stop function is not always a desirable feature.

These units are also extremely popular with refrigeration and temperature controlled vehicles. Many refrigeration transportation companies suffer from the engine cutting out when the vehicle enters Start/Stop mode, which in turn shuts off the power to the temperature controlled storage at the rear of the vehicle. This poses huge problems as these systems require constant power during transportation to keep them at the desired temperature. By installing our CANM8 START/STOP DISABLE Interface, this completely eradicates this issue and has proven to be a huge success amongst existing customers.

Most 'Start Stop' systems incorporate a manual override control but the specification for special vehicles may often require the override to be an automatic feature. Most vehicle suppliers are not able to offer this facility as an option.

The CANM8 CANNECT START-STOP DISABLE is designed to automatically disable the 'Start/Stop' function on vehicles where this features is not desired. Each application is designed specifically for a particular vehicle type and provides seemless control over the Start - Stop system. Therefore, please select your vehicle from the drop down menu so that we can program the unit with the correct software.

Each time the vehicle engine is started, the ED-OFF unit automatically disengages the Start-Stop control so that manually overriding the function is not neccessary. The Start - Stop function can be re-instated by the driver at any time during the journey as desired but will automatically cancel again the next time the vehicle is started.

Our Start Stop Disable Interfaces are currently compatible with the following vehicles. You will notice that there are two lists, one for START-STOP DISABLE and one for START-STOP DISABLE POWER. This product is suitable for those vehicles listed under the START-STOP DISABLE heading.

If your vehicle is listed under the 'START-STOP DISABLE POWER' heading, please click here to purchase this unit as it is a different version of hardware.

However if you do not see your vehicle listed, please get in touch directly as we may still be able to provide a solution for you.

 

Compatibility List


START-STOP DISABLE


  • Audi A3 8V Mk3 (2012>)
  • Audi A6 (2011>)
  • Audi TT 8S Mk3 (2014>)
  • Citroen SpaceTourer (2016>)
  • Ford Focus (2011>)
  • Ford Mondeo (2015>)
  • Ford Ranger (2016 >)
  • Ford Transit Connect (2014>)
  • Mercedes C Class W205 (2014 >)
  • Mercedes S Class W222 (2014 >)
  • Mercedes Sprinter Euro 6 (2013>)
  • Mercedes Vito (2014>)
  • Opel Movano (2010>)
  • Opel Vivaro (2015>)
  • Peugeot Expert (2016>)
  • Peugeot Traveller (2016>)
  • Renault Kangoo (2012>)
  • Renault Master (2010>)
  • Renault Trafic (2015>)
  • Seat Leon 5F (2012>)
  • Skoda Octavia III (2012 >)
  • Skoda Superb Mk3 (2015>)
  • Toyota ProAce (2016>)
  • Vauxhall Movano (2010>)
  • Vuaxhall Vivaro (2015>)
  • VW Crafter Euro 6 (2013 >)
  • VW Golf VII (2012>)
  • VW Passat B8 (2015>)
  • VW Tiguan Mk3 (2016>)
  • VW Touareg (2011>)
  • VW Touran Mk3 (2015>)
  • Volvo V40 (2012>)

 

START STOP DISABLE POWER

 

  • Honda CR-V (2013>)
  • Mitsubishi Outlander (2013 >)
  • VW Caddy (2015 >)
  • VW Passat B7 (2010 >)
  • VW Transporter T6 (2016 >)

 


Write Your Own Review

You're reviewing: CANM8 CANNECT START-STOP DISABLE

The interface features a mini wiring connector, which unplugs to allow easy installation. There are 2 connections to the vehicle CAN Bus wiring (CAN HI & CAN LO) along with a connection to a permanent, fused 12v power supply and an earth connection.

 

The CANM8 START-STOP DISABLE interface will automatically disable the vehicle Start Stop system. For some vehicles, you only need to connect the CAN Bus wires and the unit is able to de-activate the Start - Stop system via CAN. Other vehicles require the physical connection of an input and an output wire to turn the start - stop system off but these are clearly labelled on the installation instructions that will be sent with your product.

 

The interface incorporates a multi-function miniature status LED, which indicates correct connection to the CAN system, CAN activity present and confirmation that the CAN identity has been recognised.

 

The LED Status is as follows:

 

Flashing Red: Vehicle CAN Bus data detected. The START-STOP System on the vehicle is active


Flashing Green: The START-STOP System on the vehicle has been de-activated.

 

Wiring Installation Details


Please check that your wiring harness exactly matches the one shown in the product images above. The wire Pin locations and functions can be found below. The Pin locations are described from the harness side where the wires go into the molex plug. Please note that this harness is very similar to the harness for the START-STOP DISABLE POWER Interface but the Pink and Brown wires are inverted. It is essential that you have the harness described below and pictured above.

 

PIN 1 (Bottom Right Catch Side) WHITE - CAN HI

 

PIN 2 - BLUE - CAN LO

 

PIN 3 - BLACK - 0V

 

PIN 4 - RED - 12V

 

PIN 5 - (Top Right Catch Side) BROWN - INPUT

 

PIN 6 - PINK - OUTPUT (Negative)

 

Please note that the Pink and Brown wires in Pin 5 and Pin 6 are not always connected. Please refer to the installation instructions supplied with your product for vehicle specific instructions.

 

For a copy of our vehicle specific instructions, please enter your vehicle make, model and year in the comment box at the checkout so that we can supply you with the correct installation file

Our Start Stop Disable Interfaces are currently compatible with the following vehicles. You will notice that there are two lists, one for START-STOP DISABLE and one for START-STOP DISABLE POWER. This product is suitable for those vehicles listed under the START-STOP DISABLE heading.

 

If your vehicle is listed under the 'START-STOP DISABLE POWER' heading, please click here to purchase this unit as it is a different version of hardware. Although the functionality is the same, this is a completely different product so please note the difference in the installation instructions.

 

However if you do not see your vehicle listed, please get in touch directly as we may still be able to provide a solution for you.

 

Compatibility List


START-STOP DISABLE

 

  • Audi A3 8V Mk3 (2012>)
  • Audi A6 (2011>)
  • Audi TT 8S Mk3 (2014>)
  • Citroen SpaceTourer (2016>)
  • Ford Focus (2011>)
  • Ford Mondeo (2015>)
  • Ford Ranger (2016 >)
  • Ford Transit Connect (2014>)
  • Mercedes C Class W205 (2014 >)
  • Mercedes S Class W222 (2014 >)
  • Mercedes Sprinter Euro 6 (2013>)
  • Mercedes Vito (2014>)
  • Opel Movano (2010>)
  • Opel Vivaro (2015>)
  • Peugeot Expert (2016>)
  • Peugeot Traveller (2016>)
  • Renault Kangoo (2012>)
  • Renault Master (2010>)
  • Renault Trafic (2015>)
  • Seat Leon 5F (2012>)
  • Skoda Octavia III (2012 >)
  • Skoda Superb Mk3 (2015>)
  • Toyota ProAce (2016>)
  • Vauxhall Movano (2010>)
  • Vuaxhall Vivaro (2015>)
  • VW Crafter Euro 6 (2013 >)
  • VW Golf VII (2012>)
  • VW Passat B8 (2015>)
  • VW Tiguan Mk3 (2016>)
  • VW Touareg (2011>)
  • VW Touran Mk3 (2015>)
  • Volvo V40 (2012>)


 

START STOP DISABLE POWER

 

  • Honda CR-V (2013>)
  • Mitsubishi Outlander (2013 >)
  • VW Caddy (2015 >)
  • VW Passat B7 (2010 >)
  • VW Transporter T6 (2016 >)

 

September 2014 saw the launch of our brand new CANNECT Range. The CANM8 CANNECT interfaces are the latest development to our range of CAN Bus products. These products feature some unique advantages over general CAN Bus interfaces. The most important feature of the Cannect range is that they are update-able. The CANNECT product firmware is under continual revision to keep pace with the latest vehicle applications.The CANNECT update service is available to our trade and account customers and requires the purchasing of our CANNECT-RUI Interface to access the latest software file downloads. Please enquire if you are interested in our CANNECT-RUI service and we will aim to assist you.

 

Another important feature is our Remote Support Service. The CANNECT-RUI is a dual function interface that not only provides the software update to the interface but can also be utilised by one of our engineers to remotely analyse new vehicle CAN systems or issues with existing compatibility. All that our customers require to benefit from this service is a laptop or notebook PC and a sufficient internet connection. We aim to rectify compatibility issues and offer compatibility to new vehicles within 1 hour of connection.

 

All Cannect interfaces feature a bi-colour status LED that provides a clear indication of the interface operation. Most CANNECT products also feature direct compatibility with our contact-less CAN Bus reader to enable connection to the CAN system without any metal to metal contact.

Please Login to your account in order to purchase

 

If you do not have an account with us then please click here to purchase directly from our distributor

=